The Purpose of a Gas Diffusion Layer (GDL) – Tech Article by Fuel Cells Etc
College Station, TX — Feb 27, 2013 / (http://www.myprgenie.com) — The Gas Diffusion Layer (GDL) plays several critical roles in a typical fuel cell application and is often integrated as part of the Membrane Electrode Assembly (MEA). Typical applications that use GDLs consist of Polymer Electrolyte Fuel Cells (PEMFC) and Direct Methanol Fuel Cells (DMFC). When a GDL is coated with a catalyst it is than referred to as a Gas Diffusion Electrode (GDE), which are sometimes sold or installed separately from the Membrane or MEA. Acting as an electrode is the easy part of the GDL/GDE, though.
What Does a Gas Diffusion Layer (GDL) Consist Of?
The GDL is a porous structure made by weaving carbon fibers into a carbon cloth (e.g. GDL-CT and ELAT) or by pressing carbon fibers together into a carbon paper (e.g. Sigracet, Freudenberg, and Toray). Many of the standard GDLs that are produced today come with a Micro Porous layer (MPL) and hydrophobic treatment (PTFE). The MPL and PTFE help with the contact to the membrane and with water management. The MPL typically provides a smooth layer with plenty of surface area for catalyst and good contact with the membrane. The MPL often uses PTFE as a binder that increases hydrophobicity, which helps keep the water within the membrane from escaping — drying out the membrane and causing higher resistance (lower performance). There is often an additional PTFE coating on the MPL surface to further augment this.
What Exactly Does a Gas Diffusion Layer (GDL) Do?
GDL essentially acts as an electrode that facilitates diffusion of reactants across the catalyst layered membrane. The surface area and porosity of the GDL is what allows for the reactants in the channels of the bipolar plate to diffuse along the active area (catalyst area) of the membrane. With the increased surface area that the GDL provides, transportation of electricity from each individual catalyst site in the Membrane Electrode Assembly (MEA) to the current collectors increases.
The GDL is also the component that handles the fuel cell moisture control. It does this by consistently helping to remove the by-produced water outside of the catalyst layer and prevent flooding chambers. The GDL also helps keep some water on the catalyst layer surface to improve conductivity throughout the membrane. It is also important to note that the GDL allows for heat transfer during cell operation as well.
Important consideration must also be made in regards to the mechanical properties of the GDL material since it is often compressed or partially compressed when the fuel cell stack is assembled. This compression can act as a bit of a “spring” to help accommodate for some of the thermal expansion larger fuel cell stacks can see in operation.
“We found in our work that there was not a very good single source that compared the properties of the most common GDL materials (and the manufacturers often use different units and measures),” says Daniel Westerheim, CEO of FuelCellsEtc. “We’ve compiled a Gas Diffusion Layer comparison table of some of the more common GDL materials so you can quickly compare properties and help decide which option might be best for you. Which Gas Diffusion Layer (GDL) is right for you will depend on the specifics of how your fuel cell hardware, MEAs, and sealing are all designed.”
For more information contact Fuel Cells Etc or visit the fule cell store and browse the current Gas Diffusion Layers and Gas Diffusion Electrodes that they have in stock.
About FuelCellsEtc
FuelCellsEtc specializes in manufacturing high performance custom fuel cell and electrolyzer components to product manufacturers, researchers and educators around the world. The company prides itself on industry leading customer service and lead times. FuelCellsEtc’s primary products include Membrane Electrode Assemblies (MEAs), Catalyst Coated Membranes (CCMs), and Gas Diffusion Electrodes (GDEs), all for a wide variety of fuel cells and electrolyzers.
Follow, Connect and Collaborate with FuelCellsEtc:
Website: http://fuelcellsetc.com/
Web-Store: https://fuelcellsetc.com/
Facebook: https://www.facebook.com/
Google +: https://plus.google.com/
Twitter: https://twitter.com/
Linkedin: http://www.linkedin.com/